📧 [email protected] · 📱 WhatsApp: +86 193 9148 5053 Request a Quote — reply within 24 hours询价 — 24小时内回复  

Tower Crane & Construction Hoist Spare Parts — Factory Direct, Matched to Your Crane Model

塔机与施工升降机配件 — 源头工厂直供,按你的机型精准配套

Mast sections L46A1 / L68B1-B3 · Fixing & detachable legs · Wall-tie frames · Tie rods · Slewing bearings · SC200/200 hoist parts. Machined and welded at our partner factories in Hunan — China's construction-machinery heartland. 10+ years of hands-on crane experience behind every quotation.

标准节 L46A1 / L68B1-B3 · 可拆卸/预埋支腿 · 附着框 · 撑杆 · 回转支承 · SC200/200 升降机配件 · 标准件。加工与焊接全部在湖南合作工厂完成——中国工程机械产业重镇。每一份报价背后,是 10 年以上一线塔机租赁与运营经验。

💬 WhatsApp Us💬 WhatsApp 咨询 Get a Fixed-Price Quote获取固定报价
84part numbers个配件编号
20+source factories家源头工厂
10years on site年一线经验
24hquote reply报价响应
10+ Years, One Vertical十年专注,只做这一行

Tower cranes and construction hoists only — run by people who operated these machines for a decade.

只做塔机和施工升降机——经营者本人就有十年设备租赁与运营经验。

Factory Direct Pricing源头工厂价格

20+ source factories, no middleman. Structural parts with Q345B material certificates.

20+ 家源头工厂,没有中间商。结构件提供 Q345B 材质单。

Video Inspection视频验货

See your parts before they ship. Third-party inspection (SGS / BV / TUV) welcome.

发货前视频验货,欢迎第三方验货(SGS / BV / TUV)。

Model-Match Guarantee机型匹配保证

Send your crane model and parts list — we confirm compatibility before you pay.

发来机型和配件清单——付款前我们先确认匹配,不匹配不收钱。

Spare Parts

配件产品

Price basis: EXW our factory, Changsha, Hunan — packing included, tax-exclusive, inland freight to port NOT included. Legs, tie-in frames and tie rods are listed with prices. All other parts are quoted on request — each comes in two grades. Full quotation with MOQ & lead time within 24 hours.

价格口径:工厂出厂价(EXW,湖南长沙),含包装,不含税,不含工厂到港口的内陆运费。支腿、附着框、扶墙杆直接标价;其余配件分标准版与高配版,统一按需报价。完整报价单(含起订量与交期)24 小时内回复。

Why most parts are quoted, not priced. One part number often has two builds — a standard grade that fits the original machine, and a premium grade built for dust and heat on Africa and Middle East sites. A single listed number would hide which one you are buying, so we send both quotations side by side with material specs. You compare, then choose. For reference, trucking a 40HQ from our factory to Shenzhen or Shanghai runs about US$650–750 — always invoiced as a separate line, never folded into the unit price.

为什么大部分配件只挂询价。同一个编号常有两个品质档:标准版对得上原机装配,高配版为风沙、高温工况加强(非洲、中东工地)。只标一个价,说不清您买到的是哪一档,所以我们把两份报价并列发您,材质和工艺一起对比,由您来选。另外,一个 40HQ 从工厂拖到深圳或上海港约 650–750 美元,运费始终单列开票,不折进单价。

A. Tower Crane Legs, Frames & Tie Rods

A. 塔机支腿、附着框与扶墙杆

TL-01 Detachable leg QTZ6012 with round base flange

Detachable leg QTZ6012可拆卸支腿 QTZ6012

QTZ6012 · round base flange with 4 anchor-bolt holes · square-tube spigot, pin connection to mast section · 2 pin bosses · 3 stiffener ribs · yellow painted, bolt-down and removableQTZ6012 · 圆形地脚法兰 4 个螺栓孔 · 方管插口,与标准节销轴连接 · 2 个圆钢套 · 三道加劲肋 · 黄色喷漆,螺栓固定可拆
US$385 / set · EXW $385/套 · 出厂价
1 set = 4 legs · US$95 per leg 1 套 = 4 支 · 单支 US$95
TL-02

Recoverable leg QTZ6513 4-boss可回收支腿 QTZ6513(四圆钢套)

QTZ6513 · 4 legs per set · short bolt-down leg: round base flange with 4 anchor-bolt holes, clamped onto the foundation anchor bolts and taken off for the next site · 4 pin bosses per leg · 3 stiffener ribs · shot-blasted, painted to your colour on requestQTZ6513 · 每套 4 支 · 矮款螺栓固定:圆法兰 4 个地脚螺栓孔,用基础预埋螺栓压紧,下个工地拆下再用 · 每支 4 个圆钢套 · 三道加劲肋 · 抛丸处理,可按你要的颜色喷漆
US$545 / set · EXW $545/套 · 出厂价
1 set = 4 legs · US$135 per leg 1 套 = 4 支 · 单支 US$135
TL-03 Recoverable detachable leg QTZ68B — white painted clevis leg with octagonal base plate

Recoverable detachable leg QTZ68B可回收支腿 QTZ68B

QTZ68B · octagonal base plate with 6 anchor-bolt holes · double clevis (two pin lugs) for the mast chord · full-length stiffener plates · bolts down to the foundation and unbolts for reuse on the next site · white paintedQTZ68B · 八角形底板 6 个地脚螺栓孔 · 双耳板销轴连接标准节主弦 · 全长加劲板 · 螺栓固定在地基上,拆下可重复使用 · 白色喷漆
US$990 / set · EXW $990/套 · 出厂价
1 set = 4 legs · US$245 per leg 1 套 = 4 支 · 单支 US$245
TL-04 Embedded fixing leg QTZ6012 two-piece — batch of cast-in legs, yellow tops bolted onto rusted embedment posts

Embedded fixing leg QTZ6012预埋支腿 QTZ6012(两节式)

QTZ6012 / 6013 · 4 legs per set · two-piece: yellow top section bolted onto the rusted embedment post, the whole leg is cast into the foundation · 4 pin bosses on the top section · square flange, 4 bolts · not recoverable适配 QTZ6012 / 6013 · 每套 4 支 · 两节式:黄色上段与锈色预埋杆螺栓对接,整支浇筑在基础里 · 上段 4 个圆钢套 · 方形连接法兰 4 螺栓 · 不可回收
US$505 / set · EXW $505/套 · 出厂价
1 set = 4 legs · US$125 per leg 1 套 = 4 支 · 单支 US$125
TL-06 Embedded fixing leg QTZ6517 with 4 pin bosses — two-piece cast-in legs in the yard

Embedded fixing leg QTZ6517预埋支腿 QTZ6517(四圆钢套)

QTZ6517 · 4 legs per set · 4 pin bosses per leg · two-piece: bare-steel embedment post with base plate bolted to the painted top section, the whole leg is cast into the foundation · square flange, 4 bolts · not recoverableQTZ6517 · 每套 4 支 · 每支 4 个圆钢套 · 两节式:预埋杆连底板与喷漆上段螺栓对接,整支浇筑在基础里 · 方形连接法兰 4 螺栓 · 不可回收
US$790 / set · EXW $790/套 · 出厂价
1 set = 4 legs · US$195 per leg 1 套 = 4 支 · 单支 US$195
TL-07

Embedded fixing leg 7020-12K预埋支腿 7020-12K

7020-12K · cast-in leg, 4 pcs per crane foundation · fish-tail double clevis top, large pin bore for the mast section · tapered box body, welded stiffener ribs · thick square base plate with 4 open slotted bolt pockets, welded onto the foundation rebar cage · light grey primer · cast into the concrete, not recoverable7020-12K · 预埋支腿,一台塔机基础 4 支 · 顶部鱼尾双耳板,大销轴孔与标准节连接 · 锥形箱体,焊接加劲板 · 厚方底板 4 个开口螺栓槽,与基础钢筋笼焊牢 · 浅灰底漆 · 浇筑在混凝土中,不可回收
US$1,740 / set · EXW $1,740/套 · 出厂价
1 set = 4 legs · US$435 per leg 1 套 = 4 支 · 单支 US$435
TL-08

Embedded fixing leg 7035预埋支腿 7035

7035 · cast-in leg, 4 pcs per foundation · two-section: yellow top bolted onto the embedded shank · fish-tail double clevis top, two pin bores for the mast section · tapered shank with four splayed base wings, cast into the concrete · yellow top, red-oxide primer below · not recoverable7035 · 预埋支腿,一台基础 4 支 · 两节式:黄色上段螺栓压在预埋杆上 · 顶部鱼尾双耳板,两个销轴孔接标准节 · 锥形杆身 + 四片外扩基础翼板,浇筑在混凝土中 · 上段黄漆、下段红丹底漆 · 不可回收
US$1,860 / set · EXW $1,860/套 · 出厂价
1 set = 4 legs · US$465 per leg 1 套 = 4 支 · 单支 US$465
TL-09

Embedded fixing leg 7052 braced预埋支腿 7052(带斜撑)

7052 · 4 cast-in legs, tie bars and diagonal bracing bolted into one square frame · fish-tail clevis top, two pin bores for the mast section · yellow top on red-oxide embedded shank · K-shaped connection pieces supplied loose · holds the legs square while pouring · not recoverable7052 · 4 支预埋支腿 + 水平拉杆 + 斜撑,螺栓连成方形底架 · 顶部鱼尾耳板,两销轴孔接标准节 · 黄色上段 + 锈色预埋杆 · 另配 K 形连接片 · 浇筑时定住支腿方正 · 不可回收
US$2,750 / set · EXW $2,750/套 · 出厂价
1 set = 4 legs · US$690 per leg 1 套 = 4 支 · 单支 US$690
TL-10A D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D600 with rods预埋支腿 D600 带连杆

D600 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · tie rods and diagonal bracing bolt the four legs into one square frame · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD600 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 水平拉杆+斜撑把 4 支连成方形底架 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$3,765 / set · EXW $3,765/套 · 出厂价
1 set = 4 legs · US$940 per leg 1 套 = 4 支 · 单支 US$940
TL-10B D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D600 w/o rods预埋支腿 D600 不带连杆

D600 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · supplied without tie rods or bracing · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD600 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 不带拉杆和斜撑 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$2,670 / set · EXW $2,670/套 · 出厂价
1 set = 4 legs · US$670 per leg 1 套 = 4 支 · 单支 US$670
TL-10C D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D800 with rods预埋支腿 D800 带连杆

D800 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · tie rods and diagonal bracing bolt the four legs into one square frame · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD800 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 水平拉杆+斜撑把 4 支连成方形底架 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$5,825 / set · EXW $5,825/套 · 出厂价
1 set = 4 legs · US$1,455 per leg 1 套 = 4 支 · 单支 US$1,455
TL-10D D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D800 w/o rods预埋支腿 D800 不带连杆

D800 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · supplied without tie rods or bracing · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD800 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 不带拉杆和斜撑 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$4,005 / set · EXW $4,005/套 · 出厂价
1 set = 4 legs · US$1,000 per leg 1 套 = 4 支 · 单支 US$1,000
TL-10E D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D1100 with rods预埋支腿 D1100 带连杆

D1100 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · tie rods and diagonal bracing bolt the four legs into one square frame · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD1100 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 水平拉杆+斜撑把 4 支连成方形底架 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$6,635 / set · EXW $6,635/套 · 出厂价
1 set = 4 legs · US$1,660 per leg 1 套 = 4 支 · 单支 US$1,660
TL-10F D-series embedded fixing legs — four cast-in legs with clevis heads, tie rods and bracing set on the foundation rebar cage

Embedded leg D1100 w/o rods预埋支腿 D1100 不带连杆

D1100 · 4 cast-in legs per foundation · heavy clevis head with a large round pin bore for the mast chord · square base plate welded onto the foundation rebar cage · supplied without tie rods or bracing · cast into the concrete, not recoverable · built to the tower crane manual and foundation drawingD1100 · 一台基础 4 支 · 顶部厚耳板大圆销孔接标准节主弦 · 方形底板与基础钢筋笼焊牢 · 不带拉杆和斜撑 · 浇筑在混凝土内,不可回收 · 严格按塔机说明书及基础图施工生产
US$4,210 / set · EXW $4,210/套 · 出厂价
1 set = 4 legs · US$1,050 per leg 1 套 = 4 支 · 单支 US$1,050
TL-11 Fish-tail leg L46 — blue-grey painted tower crane foundation leg

Fish-tail leg L46鱼尾板支腿 L46

L46 · fish-tail clevis top, two plates with pin hole · tapered box body with welded stiffener · square base seat, bolted to the foundation · blue-grey paintedL46 · 顶部鱼尾双耳板(两块夹板 + 销轴孔)· 锥形箱体,焊接加劲板 · 方形底座,地脚螺栓固定 · 蓝灰漆
US$710 / set · EXW $710/套 · 出厂价
1 set = 4 legs · US$180 per leg 1 套 = 4 支 · 单支 US${per:,}
TL-12 Fish-tail leg L68 200x20x850 mm — yellow painted tower crane base legs in stock

Fish-tail leg L68 200×20×850 mm鱼尾板支腿 L68(200×20×850)

L68 · section 200 × 20 mm, overall height 850 mm (standard length) · fish-tail clevis top: two cheek plates with pin hole · tapered box body, 14 mm stiffener ribs · square base plate with anchor-bolt holes · bolted down to the foundation · yellow paintedL68 · 截面 200×20 mm,整高 850 mm(标准款)· 顶部鱼尾双耳板带销轴孔 · 锥形箱体,14 mm 加劲板 · 方形底板带地脚螺栓孔 · 螺栓压在地基上 · 黄色喷漆
US$970 / set · EXW $970/套 · 出厂价
1 set = 4 legs · US$240 per leg 1 套 = 4 支 · 单支 US${per:,}
TL-12B Fish-tail leg L68 200x20x1450 mm tall version — yellow painted legs with 380x380 base plates

Fish-tail leg L68 200×20×1450 mm鱼尾板支腿 L68(200×20×1450)

L68 · same 200 × 20 mm section as the 850 mm leg, overall height 1450 mm (tall version, for a deeper foundation) · fish-tail clevis top with pin hole · tapered box body, 14 mm stiffener ribs · base plate 380 × 380 mm · bolted down to the foundation · yellow paintedL68 · 截面与 850 款同为 200×20 mm,整高 1450 mm(高款,配深基础)· 顶部鱼尾双耳板带销轴孔 · 锥形箱体,14 mm 加劲板 · 底板 380×380 mm · 螺栓压在地基上 · 黄色喷漆
US$1,030 / set · EXW $1,030/套 · 出厂价
1 set = 4 legs · US$260 per leg 1 套 = 4 支 · 单支 US${per:,}
TL-13 Fish-tail leg L69 200x26x850 mm — heavier section yellow painted legs with 4-hole base plates

Fish-tail leg L69 200×26×850 mm鱼尾板支腿 L69(200×26×850)

L69 · heavier 200 × 26 mm section, overall height 850 mm (standard length) · fish-tail top: pin-eye plate with side cheek plate · tapered box body, 14 mm stiffener ribs · square base plate with 4 anchor-bolt holes · bolted down to the foundation · yellow paintedL69 · 加厚截面 200×26 mm,整高 850 mm(标准款)· 顶部鱼尾耳板 + 侧夹板 · 锥形箱体,14 mm 加劲板 · 方形底板 4 个地脚螺栓孔 · 螺栓压在地基上 · 黄色喷漆
US$1,135 / set · EXW $1,135/套 · 出厂价
1 set = 4 legs · US$285 per leg 1 套 = 4 支 · 单支 US${per:,}
TL-13B Fish-tail leg L69 200x26x1450 mm tall version — yellow painted legs in stock

Fish-tail leg L69 200×26×1450 mm鱼尾板支腿 L69(200×26×1450)

L69 · same 200 × 26 mm heavier section as the 850 mm leg, overall height 1450 mm (tall version, for a deeper foundation) · fish-tail pin-eye with side cheek plate · tapered box body, 14 mm stiffener ribs · square base plate · bolted down to the foundation · yellow paintedL69 · 截面与 850 款同为 200×26 mm,整高 1450 mm(高款,配深基础)· 顶部鱼尾耳板 + 侧夹板 · 锥形箱体,14 mm 加劲板 · 方形底板 · 螺栓压在地基上 · 黄色喷漆
US$1,135 / set · EXW $1,135/套 · 出厂价
1 set = 4 legs · US$285 per leg 1 套 = 4 支 · 单支 US${per:,}
TL-14 Wall tie frame 46A — yellow two-piece tie-in frame for 1.6 m mast section, 3rd generation butterfly design

Wall tie frame 46A 1.6 m two-piece附着框 46A(1.6 截面 两页蝴蝶款)

Fits 46A mast section, 1.6 m square · 4 sets make one full ring · 3rd generation butterfly design, two half frames bolt together around the mast · four corner clevis plates with pin bores for the tie rods · connection plates with chain-secured pins · yellow painted · shipped as a pair of halves 适配 46A 标准节,1.6 m 方截面 · 4 套拼成一整圈 · 三代蝴蝶款,两片半框对接,螺栓抱紧塔身 · 四角销孔耳板接撑杆 · 连接板配防丢链条销 · 黄色喷漆 · 两片半框一套
US$625 / set · EXW $625/套 · 出厂价
1 set = 2 pcs · US$310 each 1 套 = 2 片 · 单片 US${per:,}
TL-15 Wall tie frame 68B — yellow half frame for 2.0 m mast section, 3rd generation butterfly two-piece design

Wall tie frame 68B 2.0 m two-piece附着框 68B(2.0 截面 两页蝴蝶款)

Fits 68B mast section, 2.0 m square · 4 sets make one full ring · 3rd generation butterfly design, two half frames bolt together around the mast · four corner clevis plates with pin bores for the tie rods · bolted splice plates at the half-frame ends · yellow painted · shipped as a pair of halves 适配 68B 标准节,2.0 m 方截面 · 4 套拼成一整圈 · 三代蝴蝶款,两片半框对接,螺栓抱紧塔身 · 四角销孔耳板接撑杆 · 半框端部螺栓拼接板 · 黄色喷漆 · 两片半框一套
US$1,115 / set · EXW $1,115/套 · 出厂价
1 set = 2 pcs · US$560 each 1 套 = 2 片 · 单片 US${per:,}
TL-21 Four-piece wall tie frame — rows of yellow corner sections with twin pin-bore clevis plates and slotted base rails in the yard

Four-piece wall tie frame附着框 四页式

Four corner sections bolt together around the mast · each section: two heavy pin-bore clevis plates for the tie rods, long slotted base rail clamping the mast corner · section size made to your mast · yellow painted · large stock四片角件对接抱紧塔身四角 · 每片:顶部两块厚销孔耳板接撑杆,底部通长开槽底板卡住塔身角 · 截面按标准节定制 · 黄色喷漆 · 大批现货
US$1,175 / ton · EXW$1,175/吨 · 出厂价
TL-16 Telescopic wall tie rod — yellow square-tube struts with screwed adjusting rods, lock nuts and pin-bore connection plates

Telescopic wall tie rod伸缩撑杆(扶墙杆)

Square-tube body with welded pin-bore connection plates · screwed adjusting rod with lock nuts at one end, length set on site · made to your wall distance · yellow painted · sold by weight方管杆身,焊有销孔连接板 · 一端螺纹丝杠 + 锁紧螺母,现场调节长度 · 长度按塔机离墙距离定制 · 黄色喷漆 · 按吨计价
US$1,175 / ton · EXW$1,175/吨 · 出厂价
TL-18 Lattice wall tie rod — grey primed truss struts with heavy pin-bore clevis plates, stacked in the workshop

Lattice wall tie rod花架撑杆(格构式扶墙杆)

Lattice (truss) body — rectangular chords with welded diagonal bracing · heavy double pin-bore clevis plate at each end, for the wall-tie frame and the building anchor · light for its length, used where the wall distance is long · made to your wall distance · grey primer finish · sold by weight桁架格构杆身 — 矩形主弦 + 焊接斜腹杆 · 两端厚重双销孔耳板,分别与附着框、建筑物锚固座销接 · 同长度下自重轻,适合离墙距离较大的附着 · 长度按塔机离墙距离定制 · 浅灰底漆 · 按吨计价
US$1,275 / ton · EXW$1,275/吨 · 出厂价
TL-20 Segmented wall tie rod — yellow truss sections with square pin-bore end plates and clevis ends, stacked in the yard

Segmented wall tie rod分段支撑(分段式扶墙杆)

Fixed-length truss sections joined end to end with a pin, total length set by the number of sections · one end has a square end plate with a large pin bore, the other a matching clevis · truss body: rectangular chords with welded diagonal bracing · yellow painted · shipped by set or by weight定长桁架短节,首尾用销轴对接,总长度靠段数组合 · 一端方形封头带大销孔,另一端叉耳板同孔径 · 桁架杆身:矩形主弦 + 焊接斜腹杆 · 黄色喷漆 · 可按套或按吨发货
US$1,275 / ton · EXW$1,275/吨 · 出厂价
TC-050 Foundation anchor bolt (L-bolt) — Q355B, black oxide, M39–M48

Foundation anchor bolt (L-bolt) — Q355B, black oxide, M39–M48地脚螺栓(L 型弯钩)· Q355B 锰钢 · 煮黑

Q355B Mn steel, black oxide · M39×1050 / M42×1200 / M45×1200 / M48×1200 · yellow zinc nuts + washers · bundled for exportQ355B 锰钢,煮黑处理 · M39×1050 / M42×1200 / M45×1200 / M48×1200 · 配镀黄锌螺母 + 垫片 · 捆装出口
Price on request · per set→询价 · 按套→

B. Tower Crane Mechanism & Safety Parts

B. 塔机机构与安全件

TC-002 Grade 10.9 high-strength bolts M30×350 — galvanised hex-head bolts in a heap, each with nut, plain washer and spring washer

High-strength bolt M30×350高强螺栓 M30×350

M30×350 grade 10.9 high-strength bolt · rolled thread on a partly threaded shank · with nut, plain washer and spring washer · hot-dip galvanised for export · torque to the crane manualM30×350 高强螺栓 · 10.9 级 · 滚制螺纹,半牙 · 配螺母、平垫、弹垫 · 热镀锌,适合海运 · 力矩按塔机说明书
Price on request · per piece→询价 · 按支→
TC-006 Hoisting motor 24/24/5.4kW — grey ribbed cylindrical frame, top terminal box, heavy front flange, strapped on an export pallet

Hoisting motor 24/24/5.4kW起升电机 24/24/5.4kW

24/24/5.4 kW wound-rotor crane-duty motor · ribbed cylindrical frame with a large bolted top terminal box · heavy front flange, spigot fit straight onto the hoist gearbox · rear cowl over the brake drum · three lifting eyes · strapped on an export pallet, wooden case on request24/24/5.4kW 绕线转子起重电机 · 圆柱机座带散热筋,顶部大接线盒 · 前端厚法兰止口直接对接起升减速机 · 尾部风罩罩住制动轮 · 三个吊环 · 木托盘打包,可加出口木箱
Price on request · per unit→询价 · 按台→
TC-007 Tower crane brake 315 type — red twin-arm brake frame with grey electro-hydraulic thruster, brake shoes and adjusting rod

Brake 315 type制动器 315型

45# cast steel shoes · electro-hydraulic thruster + twin-arm brake frame · red frame, grey thruster · shoes and linings replaceable · for hoisting / slewing duty45# 铸钢制动瓦 · 电力液压推动器 + 双臂制动架 · 红架灰推动器 · 刹车片可更换 · 适用起升 / 回转机构
Price on request · 2 grades→询价 · 标准版 / 高配版→
TC-011 Tower crane trolley motor 2.2/3.3 kW — dark grey ribbed motor with a lifting eye, nameplate, side terminal box and yellow warning label, bolted to a machine face

Trolley motor 2.2/3.3kW变幅电机 2.2/3.3kW

Tower crane trolley motor · 2.2 kW or 3.3 kW · splined shaft straight into the trolley reducer · ribbed cast-iron frame with a lifting eye · side terminal box, IP54 · also the motor fitted to the trolley winch TC-012塔机变幅(小车)电机 · 2.2kW 或 3.3kW · 花键轴直接插变幅减速机 · 铸铁机座带散热筋,顶部吊环 · 侧出接线盒,IP54 · 即 TC-012 变幅机构所配电机
Price on request · per unit→询价 · 按台→
TC-012 Trolley winch for a 60 m jib — grooved rope drum on a welded frame, flange-mounted motor and reducer, rows of finished units behind

Trolley mechanism (60 m jib)变幅机构(60米臂)

Trolley winch for a 60 m jib · grooved rope drum in a welded frame with bolt-down feet · flange-mounted motor and reducer with built-in brake · rope diameter and capacity set to your jib length · run-in tested before packing · jib-length variants quoted on request60 米臂小车变幅卷扬 · 带绳槽卷筒装在焊接机架上,底脚螺栓固定 · 法兰对接电机减速机一体,内置制动器 · 绳径与容绳量按臂长配置 · 出厂前试运转 · 其他臂长可另报
Price on request · per unit→询价 · 按台→
TC-014A Fluid coupling — tower crane slewing drive, 280 type

Fluid coupling — tower crane slewing drive, 280 type塔机回转液力偶合器(280 型)

Cast aluminium housing · split flange with 8 clamp bolts · hollow hub with keyway · hex filler plug on the shell · soft start for slewing / hoist drive · oil drained for shipment, refill before use铸铝壳体 · 8 螺栓分体法兰 · 空心轴带键槽 · 壳体带加油螺塞 · 用于回转 / 起升机构软启动 · 出口排油,使用前加注
Price on request · per unit→询价 · 按台→
TC-030 Tower crane slewing drive — slewing motor and QTH 100 planetary reducer

Tower crane slewing drive — motor + QTH planetary reducer塔机回转驱动总成(电机 + QTH 行星减速机)

QTH 100 planetary slewing reducer · 244 kg unit weight · multi-speed electromagnetic brake motor, flange mount + keyed shaft · supplied as a matched set or as single components · 2024-10 production, in stock · quoted by crane modelQTH 100 行星回转减速机 · 整机重 244 kg · 配变极多速电磁制动电机,法兰安装 + 平键输出轴 · 可整套配货,也可单件采购 · 2024 年 10 月出厂现货 · 按机型报价
Price on request · per set or per piece→询价 · 整套 / 单件均可→

C. Construction Hoist Parts

C. 施工升降机配件

CH-001 Hoist drive rack — a pair of long milled racks with rectangular teeth laid across a steel trestle, coupling bolt holes visible at the end

Hoist drive rack (per piece)升降机传动齿条(单根)

SC200/200 hoist rack · module 8 or 10 · 40×60 mm section · 1508 mm standard length · milled rectangular teeth, tooth faces hardened · drilled both ends for pins and coupling bolts · 45# carbon steel, painted on requestSC200/200 升降机传动齿条 · 模数 8 或 10 · 40×60 截面 · 标准段 1508mm · 矩形铣齿,齿面淬火 · 两端销孔和对接螺栓孔 · 45# 碳钢,可喷漆
Price on request · per piece→询价 · 按根→
CH-002 Hoist wall tie-in frame — hot-dip galvanised welded frame with two adjustable arms, U-bolt clamps for the mast and a bolted wall plate

Hoist wall tie-in frame升降机扶墙架(附墙架)

hot-dip galvanised welded frame · two adjustable arms with slotted holes, stand-off distance set on site · U-bolt and pin clamps onto the mast · wall plate bolted with M20 anchors · for SC100 / SC200 hoist mast · other reach made to order热镀锌焊接框架 · 两根可调拉臂带长圆孔,现场调离墙距离 · U 型卡加销轴抱紧导轨架 · 立板用 M20 膨胀螺栓固定于墙体 · 适配 SC100 / SC200 升降机导轨架 · 其他长度可定制
Price on request · per set→询价 · 按套→
CH-004 Grade 10.9 mast bolts M24×265 — galvanised hex-head bolts in a heap, each with nut, plain washer and spring washer

Mast bolt M24×265连接螺栓 M24×265

M24×265 grade 10.9 mast bolt · rolled thread on a partly threaded shank · with nut, plain washer and spring washer · hot-dip galvanised · torque to the hoist manualM24×265 连接螺栓 · 10.9 级 · 滚制螺纹,半牙 · 配螺母、平垫、弹垫 · 热镀锌 · 力矩按升降机说明书
Price on request · per piece→询价 · 按支→
CH-005 PA400 mast extension hoist — red drum housing with wound steel rope, ribbed motor, nameplate reading PA400 mini electric crane, 200/400 kg

Mast extension hoist PA400加节装置 PA400(迷你电动葫芦)

PA400 mini electric hoist for adding mast sections · 200 kg single rope / 400 kg double · 12 m lift single, 6 m double · 5 mm rope · 220 V 50 Hz, 950 W, 25% / 10 min duty · 15.8 kg net · bracket and boom extraPA400 加节用迷你电动葫芦 · 单绳 200kg / 双绳 400kg · 单绳提升 12m,双绳 6m · 5mm 钢丝绳 · 220V 50Hz 950W,25%/10min · 净重 15.8kg · 支架吊杆另配
Price on request · per set→询价 · 按台→
CH-006A Drive motor 11 kW

Drive motor 11 kW驱动电机 11kW

11 kW · built-in electromagnetic brake · flange mount, shaft-end guard · for SC200/200 hoist drive11kW · 内置电磁制动器 · 法兰安装,轴端带护套 · 用于 SC200/200 施工升降机驱动
Price on request · 2 grades→询价 · 标准版 / 高配版→
CH-007 Hoist drive unit — gear reducer + brake motor, three-drive

Hoist drive unit — gear reducer + brake motor, three-drive升降机驱动机构(减速机 + 电机一体 · 三驱动)

CASK hoist gear reducer, type 1130-125 as shown · flange-coupled brake motor · three units per SC200/200 · 11 kW or 13 kW motor · gear oil not includedCASK 提升机齿轮减速机(图示型号 1130-125)· 法兰直联制动电机 · SC200/200 每台配三套 · 配 11kW 或 13kW 电机 · 不含齿轮油
Price on request · 2 grades→询价 · 标准版 / 高配版→
CH-010B Hoist brake spare parts — complete set, sold singly or as a repair kit

Hoist brake spare parts — complete set, sold singly or as a repair kit升降机刹车零部件(制动体 / 转子盘 / 风叶 / 摩擦盘 / 整流块 · 散件或成套)

10 parts shown: magnet body + red armature disc · aluminium cooling fan · serrated armature ring · friction gasket · sintered brake disc with hex hub · pressure spring · rectifier block · carbon brush holder · bush · mounting flange — quote per part or per repair kit图示 10 件:制动体 + 红色转子盘 · 铝风叶 · 齿形衔铁压环 · 摩擦垫 · 六角套烧结制动盘 · 压力弹簧 · 整流块 · 碳刷架 · 轴套 · 安装法兰盘 — 可按件或整套维修包报价
Price on request · per part or per kit→询价 · 按件 或 按套→
CH-021 Floor call system (30 floors)

Floor call system (30 floors)楼层呼叫系统(无线30层)

wireless无线
Price on request · 2 grades→询价 · 标准版 / 高配版→
CH-029 Weight sensor (pin type)

Weight sensor (pin type)重量传感器(销轴式)

pin type · 4-wire · overload protection销轴式 · 四线 · 超载保护
Price on request · 1–5 t→询价 · 1–5 吨→
CH-030 Face-recognition call unit (all-in-one)

Face-recognition call unit (all-in-one)人脸识别加呼叫器一体机

face recognition + floor call · LCD floor display人脸识别+楼层呼叫 · 液晶楼层显示
Price on request · per unit→询价 · 按台→
CH-031 Anti-fall safety device (SAJ series) — construction hoist

Anti-fall safety device (SAJ series) — construction hoist施工升降机防坠安全器(SAJ 系列)

SAJ series · fits SC100 / SC200 cage · factory assembly line, batch stock as shown · OEM replacement · nameplate and calibration date on every unitSAJ 系列 · 适配 SC100 / SC200 吊笼 · 厂内装配线批量生产(图示现货) · 原厂替换 · 每台带铭牌与标定日期
Price on request · per unit→询价 · 按台→
CH-032 Guide roller (waist roller) with bolt

Guide roller (waist roller) with bolt电梯滚轮腰轮(带销轴螺栓)

for SC100 / SC200 mast · roller + hex bolt set适配 SC100 / SC200 导轨架 · 滚轮+六角螺栓一套
Price on request · per set→询价 · 按套→
CH-033 Cable trolley with guide ring

Cable trolley with guide ring电梯电缆护圈(电缆滑车)

stainless tube + guide ring · for SC100 / SC200不锈钢管+护圈 · 适配 SC100 / SC200
Price on request · per set→询价 · 按套→
CH-034 Limit switch (travel switch)

Limit switch (travel switch)电梯行程开关(限位开关)

roller lever / adjustable lever · CHNT, XCK-J, TZ series滚轮摇臂 / 可调摇臂 · 正泰、XCK-J、TZ 系列
Price on request · per piece→询价 · 按只→
EL-001 Schneider contactor LC1D95

Schneider contactor LC1D95施耐德接触器 LC1D95(塔机/电梯通用)

TeSys LC1D95 · AC-3 95 A · coil 220 / 380 VTeSys LC1D95 · AC-3 95A · 线圈 220/380V
Price on request · per piece→询价 · 按只→
EL-002 Hollow-shaft incremental encoder (YF-EHX100H series)

Hollow-shaft incremental encoder (YF-EHX100H series)空心轴增量编码器(YF-EHX100H 系列)

IP66 · 1024 ppr · 6–30 VDC · A/B/Z differential · φ100 hollow bore, cable includedIP66 · 1024 脉冲 · 6–30VDC · A/B/Z 差分输出 · φ100 空心轴 含电缆
Price on request · per piece→询价 · 按件→
CH-035 Drive pinion gear

Drive pinion gear升降机驱动齿轮(小齿轮)

internal spline · for SC100 / SC200 drive unit · hardened内花键 · 适配 SC100 / SC200 驱动机构 · 淬火
Price on request · per piece→询价 · 按件→
CH-036 Pipe coupler (mast / tie fixing)

Pipe coupler (mast / tie fixing)升降机管扣件

hot-dip galvanised · bolt-on · for mast & tie-rod fixing热镀锌 · 螺栓紧固 · 用于导轨架及附墙杆固定
Price on request · per piece→询价 · 按只→
CH-037 Worm shaft & worm wheel

Worm shaft & worm wheel升降机减速机蜗轮蜗杆

splined worm shaft + bronze-rim worm wheel · for SC100 / SC200 reducer花键蜗杆 + 铜齿圈蜗轮 · 适配 SC100 / SC200 减速机
Price on request · per set→询价 · 按套→
CH-039 Back roller (counter roller)

Back roller (counter roller)升降机背轮

with bearing, shaft & circlip · for SC100 / SC200 · several types带轴承、轴、卡簧 · 适配 SC100 / SC200 · 多种规格
Price on request · per piece→询价 · 按只→
CH-040 Guide roller with threaded shaft

Guide roller with threaded shaft升降机滚轮(带螺纹轴)

zinc-plated · threaded stud + nut · for SC100 / SC200镀锌 · 螺纹轴+螺母 · 适配 SC100 / SC200
Price on request · per piece→询价 · 按只→
CH-041 Electromagnetic brake (coil type)

Electromagnetic brake (coil type)升降机刹车线圈(电磁制动器)

coil + armature + friction disc · for SC100 / SC200 drive · 220 / 380 V线圈+衔铁+摩擦片 · 适配 SC100 / SC200 驱动 · 220/380V
Price on request · per set→询价 · 按套→
CH-042 Coupling spider (8-lobe, size 8)

Coupling spider (8-lobe, size 8)升降机梅花垫(8 角 8 号)

8-lobe · size 8 · elastic PU · for hoist coupling8 瓣 · 8 号 · 聚氨酯弹性体 · 升降机联轴器用
Price on request · per piece→询价 · 按只→
CH-043 Hoist gear reducer — CASK type 1130-125, gear unit only

Hoist gear reducer — CASK type 1130-125, gear unit only升降机减速机(单件 · 不含电机)

CASK hoist gear reducer · type 1130-125 cast on the housing · twin round end covers, bolted flange joint to motor · fits SC200/200 drive unit · motor sold separately (CH-006A) · gear oil not includedCASK 提升机齿轮减速机 · 壳体铸字型号 1130-125 · 双圆端盖,法兰对接电机 · 适配 SC200/200 驱动机构 · 电机另配(见 CH-006A)· 不含齿轮油
Price on request · per piece→询价 · 按件→
CH-044 Base buffer spring — helical steel spring for SC series hoist

Base buffer spring — helical steel spring for SC series hoist升降机底部缓冲弹簧(螺旋钢弹簧)

helical steel spring · black painted finish · sits in the base-frame buffer seat of SC100 / SC200 hoist · several wire diameters and free lengths as shown · sold per piece螺旋钢弹簧 · 黑色涂装 · 装于 SC100 / SC200 施工升降机底架缓冲座 · 图示多种线径与自由长度 · 按件
Price on request · per piece→询价 · 按件→
CH-045 Cage door (inner door) mechanical interlock — five brand variants

Cage door (inner door) mechanical interlock — five brand variants升降机内门机械连锁(江汉 / 大汉 / 中联 / 特威 / 通用)

zinc-plated latch assembly · roller type or spring-return type · mounting hole pattern differs by brand · tell us the hoist brand and door model before ordering镀锌锁钩总成 · 滚轮式 或 弹簧回位式 · 各品牌安装孔位不同 · 下单前请提供整机品牌与门型
Price on request · per set→询价 · 按套→
CH-046 Landing door (outer gate) mechanical interlock — six brand variants

Landing door (outer gate) mechanical interlock — six brand variants升降机外门机械连锁(康博 / 江汉 / 特威 / 中联 / 京龙 / 大汉)

zinc-plated latch with tension spring · hook type or roller type · mounting hole pattern differs by brand · tell us the hoist brand and gate model before ordering镀锌锁钩 + 拉簧 · 钩式 / 滚轮式 · 各品牌安装孔位不同 · 下单前请提供整机品牌与门型
Price on request · per set→询价 · 按套→
TC-031 Tower crane obstruction light

Tower crane obstruction light塔吊障碍灯(JS 系列)

JS-01 – JS-05 mounting bases · red flashing · IP65JS-01 – JS-05 五种底座 · 红色闪光 · IP65
Price on request · per piece→询价 · 按只→
TC-032 Fall arrester (safety rope block, 20 m)

Fall arrester (safety rope block, 20 m)塔机安全绳防坠器(高空作业 20 米)

20 m working length · rope + double hook · for crane climbing20 米 · 绳式+双钩 · 塔机登机防护
Price on request · per piece→询价 · 按只→
TC-033 Tower crane operator cabin

Tower crane operator cabin塔机驾驶室(可定制尺寸)

custom size · steel frame + tempered glass · for QTZ series尺寸可定制 · 钢框架+钢化玻璃 · 适配 QTZ 系列
Price on request · per unit→询价 · 按台→
TC-034 Hoisting winch (hoisting mechanism)

Hoisting winch (hoisting mechanism)塔机起升机构(卷扬机)

motor + reducer + drum · 2-speed · for QTZ series电机+减速机+卷筒 · 双速 · 适配 QTZ 系列
Price on request · per set→询价 · 按套→
TC-035 Luffing winch (jib luffing mechanism)

Luffing winch (jib luffing mechanism)塔机变幅机构(变幅卷扬机)

motor + drum + frame · 2-speed / VFD · for QTZ series电机+卷筒+机架 · 双速/变频 · 适配 QTZ 系列
Price on request · per set→询价 · 按套→
TC-036 Slewing drive spline shaft & spline gear

Slewing drive spline shaft & spline gear回转机构花键轴 / 花键齿套

various sizes & models · external / internal involute spline · made to sample各种规格型号 · 外花键轴 / 内花键套 · 可来图来样定做
Price on request · per piece→询价 · 按件→
TC-037 Rope support roller (jib / trolley rope guide)

Rope support roller (jib / trolley rope guide)塔机托绳轮(变幅小车托绳轮)

tapered nylon / rubber body · through bore · various sizes for QTZ series锥形尼龙/橡胶轮体 · 通孔穿轴 · 各种规格 适配 QTZ 系列
Price on request · per piece→询价 · 按件→
TC-038 Crane cabin seat with integrated control consoles

Crane cabin seat with integrated control consoles塔机驾驶室座椅(带左右操纵联动台)

seat + left / right joystick consoles · 4-way joystick, push-buttons & toggles · 24 V · made to cabin layout座椅 + 左右操纵台 · 万向手柄 + 按钮/拨动开关 · 24V · 按驾驶室布局定做
Price on request · per set→询价 · 按套→
TC-039 Slewing brake assembly (windvane / storm brake)

Slewing brake assembly (windvane / storm brake)塔机风标刹车总成(回转制动器)

complete assembly · coil + armature + brake hub + spring & pin kit · various models for QTZ series成套总成 · 线圈 + 衔铁 + 制动轮 + 弹簧销轴 · 各种型号 适配 QTZ 系列
Price on request · per set→询价 · 按套→
TC-040 Centrifugal blower (cabin / cabinet cooling fan)

Centrifugal blower (cabin / cabinet cooling fan)塔机离心风机(驾驶室 / 电控柜散热)

single-inlet centrifugal · metal impeller + external-rotor motor · various models for QTZ series单进风离心式 · 金属叶轮 + 电机 · 各种型号 适配 QTZ 系列
Price on request · per piece→询价 · 按件→
TC-041 Axial flow fan (cylindrical housing, 5-blade)

Axial flow fan (cylindrical housing, 5-blade)塔机轴流风机(圆筒式 5 叶)

φ cylinder housing · 5-blade impeller + external-rotor motor · guard mesh · various sizes & voltages圆筒壳体 · 5 叶轮 + 外转子电机 · 带防护网 · 各种规格与电压
Price on request · per piece→询价 · 按件→
TC-042 Control console / joystick pod, left & right (Zoomlion cranes)

Control console / joystick pod, left & right (Zoomlion cranes)中联塔吊操作台(左右联动台)

left + right pod · 4-way joystick with bellows boot · E-stop, push buttons & toggles · armrest pad · Zoomlion compatible左 + 右联动台 · 四向手柄带防尘罩 · 急停 + 按钮/拨动开关 · 带扶手垫 · 适配中联
Price on request · per pair→询价 · 按对→
TC-043 Cup anemometer / wind speed sensor with vane

Cup anemometer / wind speed sensor with vane塔机风速仪(三杯式风速传感器)

3-cup rotor + wind vane · flange base · 3-wire cable with connector · U-bolts included · Zoomlion compatible三杯转子 + 风向尾翼 · 法兰底座 · 三芯电缆带航空插头 · 配 U 型卡 · 适配中联
Price on request · per set→询价 · 按套→
TC-044 Cable clamp / cable saddle with U-bolts & bracket

Cable clamp / cable saddle with U-bolts & bracket塔吊电缆线卡扣(电缆夹块)

rubber-lined saddle + stainless U-bolt + galvanized mounting plate · anti-wind / anti-theft / anti-pull-out · various cable diameters橡胶夹块 + 不锈钢 U 型栓 + 镀锌安装板 · 防风 / 防盗 / 防拉断 · 各种电缆外径
Price on request · per set→询价 · 按套→
TC-045 Tower crane climbing ladder — plain & caged (hoop-guard) sections

Tower crane climbing ladder — plain & caged (hoop-guard) sections塔机爬梯(直梯段 / 带护圈段)

hot-dip galvanized · 1.5–2 m per section, bolted splice · cage hoops φ700–750 · hook feet + stand-off brackets热镀锌 · 每节 1.5–2 米 螺栓对接 · 护圈 φ700–750 · 挂钩梯脚 + 固定支架
Price on request · per section→询价 · 按节→
TC-046 Tower crane anti-collision rubber buffer block

Tower crane anti-collision rubber buffer block塔吊防撞胶块(限位缓冲橡胶块)

cast rubber bumper · cylindrical or tapered body with centre through-hole · OEM sizes for trolley / jib / slewing end stops浇筑橡胶缓冲块 · 圆柱/锥形 中心通孔 · 小车 / 起重臂 / 回转限位端部撞块 各种型号
Price on request · per piece→询价 · 按件→
TC-047 Tower crane limit switch aviation connector — Zoomlion plug & socket

Tower crane limit switch aviation connector — Zoomlion plug & socket塔吊限位器用航空插头(中联配套)

waterproof circular connector · 12-pin shown, 8/10/12-pin on request · blue shell + red O-ring + metal coupling nut · plug and socket sold separately or as a pair防水圆形航空插头 · 图示 12 芯(8/10/12 芯可订)· 蓝色壳体 + 红色密封圈 + 金属锁紧环 · 插头 / 插座 可单卖或配套
Price on request · per set→询价 · 按套→
TC-048 Mast section connecting pin — hollow / wing-nut / taper types, 40Cr

Mast section connecting pin — hollow / wing-nut / taper types, 40Cr标准节配套销轴(空心销 / 蝶形销 / 锥头长销)

40Cr quenched & tempered · φ30–60 with cross hole or wing-nut end · fits QTZ mast section joints · 2-year warranty40Cr 调质 · φ30–60 带横孔 或 蝶形螺母端 · 适配 QTZ 标准节连接 · 质保两年
Price on request · per piece→询价 · 按件→
TC-049 Nylon sheave for tower crane — φ200–630, from stock

Nylon sheave for tower crane — φ200–630, from stock各种尼龙滑轮(塔机用·现货)

MC cast nylon · φ200–630 · solid web or 6-hole web · steel bushing bore · single groove shown, multi-groove on request · trolley / jib / hook blockMC 浇筑尼龙 · φ200–630 · 实心腹板 或 六孔腹板 · 钢衬套内孔 · 图示单槽,多槽可订 · 小车 / 起重臂 / 吊钩滑轮
Price on request · per piece→询价 · 按件→
TC-051 Tower crane limit switch — gear type, 10 ratios 1:30–1:960

Tower crane limit switch — gear type, 10 ratios 1:30–1:960塔吊各种限位器(齿轮式·十种速比现货)

gear-type rotary limit switch · in stock: 1:30 / 1:46 / 1:60 / 1:78 / 1:120 / 1:240 / 1:277 / 1:390 / 1:450 (DXZ) / 1:960 · for hoist, slewing and trolley travel limits · ratio must match the crane model齿轮式回转限位器 · 现货速比:1:30 / 1:46 / 1:60 / 1:78 / 1:120 / 1:240 / 1:277 / 1:390 / 1:450(DXZ)/ 1:960 · 用于起升 / 回转 / 变幅限位 · 需按机型配速比
Price on request · per piece→询价 · 按件→

D. Slewing Bearings & Drives

D. 回转支承与回转驱动

RB-001 Slewing bearing, single-row ball, external gear

Slewing bearing, single-row ball, external gear回转支承 单排四点接触球式·外齿

OD 0.8–2.5 m · 4-point contact · quoted by drawing外径 0.8–2.5 米 · 四点接触 · 按图纸报价
Price on request · by drawing→按图纸询价 · 提供型号即可报价→
RB-002 Slewing bearing, single-row ball, slim section

Slewing bearing, single-row ball, slim section回转支承 单排球式·薄型外齿

OD 0.8–2.0 m · slim ring · quoted by drawing外径 0.8–2.0 米 · 薄型环 · 按图纸报价
Price on request · by drawing→按图纸询价 · 提供型号即可报价→
RB-003 Slewing bearing, single-row ball, heavy duty

Slewing bearing, single-row ball, heavy duty回转支承 单排球式·重载外齿

OD 1.2–3.0 m · heavy duty · quoted by drawing外径 1.2–3.0 米 · 重载 · 按图纸报价
Price on request · by drawing→按图纸询价 · 提供型号即可报价→
RB-004 Slewing bearing, crossed roller, internal gear

Slewing bearing, crossed roller, internal gear回转支承 交叉圆柱滚子式·内齿

OD 0.8–2.5 m · crossed roller · quoted by drawing外径 0.8–2.5 米 · 交叉滚子 · 按图纸报价
Price on request · by drawing→按图纸询价 · 提供型号即可报价→
Also available — quote by model: mast sections L46A1 / L68B1-B3 / S24, slewing bearings QTZ63-250, SAJ30/40 safety devices, hoist mast sections SC200/200, drums, consoles, wire ropes. Send your crane model for a fixed price within 24 h.同样供货,按型号询价:标准节 L46A1 / L68B1-B3 / S24、回转支承 QTZ63-250、防坠安全器 SAJ30/40、升降机标准节 SC200/200、卷筒组、联动控制台、钢丝绳。发来型号,24 小时内给固定价。

Used Equipment — Selected & Inspected by People Who Operated Cranes

二手整机 — 由开过塔机的人挑过的设备

Machines sourced nationwide — Anhui, Hubei, Zhejiang and beyond — and shipped from the port nearest to the machine, so your inland freight stays low. Used-machine prices are ex-works at the machine's current location; inland freight to port and sea freight are quoted separately. Stock changes weekly: send your required model and we source, inspect and quote within 48 hours.

货源遍布全国——安徽、湖北、浙江等地,按机器所在地就近选港发运,内陆运费给你省下来。整机报价为设备所在地出厂价,不含设备到港口的内陆运费及海运费。现货每周变动:发来需求型号,48 小时内完成找货、验机、报价。

Used Tower Cranes

二手塔机

  • QTZ6015-8 / QTZ6515 / QTZ7020 — from 6015 up to heavy 7020
  • QTZ6015-8 / QTZ6515 / QTZ7020 — 6015 起步,7020 大塔
  • Working years & hours verified, structure measured
  • 机龄与使用小时核实,主体结构实测
  • Full dismantle-loading video & container plan
  • 拆机装柜全程视频与装箱方案

Construction Hoists

施工升降机

  • SC200/200 twin-cage, SC100/100
  • SC200/200 双笼、SC100/100
  • Mast tubes & racks wear-measured
  • 标准节与齿条磨损实测
  • Motor & safety-device test video provided
  • 电机与防坠器测试视频

Why our used machines are different

我们的二手机为什么不一样

  • 10 years of rental fleet operation — we reject machines we wouldn't use ourselves
  • 十年租赁车队运营经验——我们自己都不敢用的机器,不会卖给你
  • Third-party inspection arranged on request
  • 可安排第三方验机
  • Spare parts supply for every machine we sell — for years after purchase
  • 卖出的每一台机器,配件长期供应
  • Compliance checked first: we confirm your country accepts the machine's age before we sell it
  • 先查合规再成交:确认目的国接受该机龄,才收你的定金
📷 Machine photo slot 1 — owner uploads
(photo + model + specs)
📷 整机图片位 1 — 由站长自行上传
(照片 + 型号 + 参数)
📷 Machine photo slot 2 — owner uploads📷 整机图片位 2 — 由站长自行上传
📷 Machine photo slot 3 — owner uploads📷 整机图片位 3 — 由站长自行上传

How We Build Trust Before You Pay

付款之前,先让我们证明自己

Four steps, every order — not just the first one.

每一单都走这四步——不只是第一单。

1 · Model Matching1 · 机型匹配

Send crane model + parts list or drawings. We confirm compatibility and reply with a fixed-price quotation within 24 hours.

发来机型 + 配件清单或图纸。我们确认匹配后,24 小时内回复固定价格报价单。

2 · Video Inspection2 · 视频验货

Production & finished-parts videos — welding, dimensions, galvanizing, packing — shot for you before shipment.

发货前为你拍摄生产和成品视频——焊缝、尺寸、防腐、包装,全部可见。

3 · Third-Party Inspection3 · 第三方验货

SGS / BV / TUV or your own inspector. Mill certificates (Q345B) provided for all structural parts.

可安排 SGS / BV / TUV 或你自己的验货员。全部结构件提供 Q345B 材质证明书。

4 · Loading Proof4 · 装柜凭证

Container loading video with piece count, plus packing list matched to your PI — one-to-one.

装柜视频含点数,装箱清单与形式发票一一对应。

About Top Lift Machinery

关于拓力机械

Top Lift Machinery is based in Changsha, Hunan — China's construction-machinery heartland, home of the country's largest crane builders, with long-term production partners across the province. We are not a general trading company: we sell tower crane and construction hoist parts and used equipment only.

拓力机械位于湖南长沙——中国工程机械产业重镇,省内长期合作工厂 20 余家。我们不是什么杂货贸易公司:只做塔机与施工升降机的配件和二手设备。

Our founder spent over ten years running a crane & hoist rental fleet in China — buying machines, matching parts, overhauling structures, and deciding which used machines are worth a second life. That experience is now your sourcing advantage: we check the things a factory salesman would never tell you.

创始人做了十多年塔机与升降机租赁——买设备、配配件、修结构、判断哪些二手机值得再服役。这段经历如今是你的采购优势:工厂销售不会告诉你的那些事,我们替你查。

Long-term cooperation with 20+ source factories lets us quote factory-direct prices for structural parts, drive systems and complete machines — with the certificates and inspection evidence serious buyers need.

与 20+ 家源头工厂长期合作,结构件、传动机构、整机全部工厂直供价格——并给出专业买家需要的证书与验货凭证。

Typical buyers we serve:

🏗️ Crane rental companies — complete machines + lifetime parts support

📦 Equipment dealers — stable pricing, repeat-order terms

🏢 Construction contractors — one crane + full anchoring package in one container
我们服务谁:

🏗️ 塔机租赁公司 —— 整机 + 终身配件供应

📦 设备经销商 —— 价格稳定,支持返单

🏢 建筑承包商 —— 一台塔机 + 全套锚固件装进一个柜子

Request a Quotation

获取报价

For the fastest reply, send us: 1) your crane or hoist model, 2) the parts list (photos or drawings welcome), 3) destination port. You will receive a fixed-price quotation within 24 hours.

最快的询价方式,发给我们:1) 塔机或升降机型号,2) 配件清单(照片、图纸均可),3) 目的港。24 小时内回复固定价格报价单。

Emails are answered by our sales team Monday–Saturday. Urgent breakdown parts: WhatsApp.

邮件周一至周六有专人回复。急件、抢修件请直接 WhatsApp。

↑